Газов инжекцион BRC

Инжекторите GP13, позволяващи да отговорят на изискванията на двигателите от последно поколение, са включени в Alba 32, комплектът, предназначен за LPG и CNG преобразуване на автомобилни двигатели с искрово запалване.

Предлага се за 3- и 4-цилиндрови превозни средства и е създаден с оглед да се запазят основните характеристики на газовите инжекционни системи BRC, като например значителната функция за диагностика на ECU на газа.

Hp level sensor high pressure - CN

• Gas pressure sensor
• Weight: 32 g
• Integrated connector
• Power Supply Voltage: 5 ± 0,25 VDC
• Supply Current: 20 mA MAX
• Output Voltage Range (pressure): 0,5 to 4,5 V
• Operating temperature -40 °C ÷ 135 °C
• Approval: R110

Zenith reducer - CN

• Double stage type with diaphragms
• Water Temperature Sensor
• Adjusted pressure: 2.000 mbar relative to the intake manifold pressure
• No bleeding operation needed
• Δp adjustable between 2.000 and 2.500 mbar
• Approval: R110

MS Zenith reducer - CN

• Mono stage type with diaphragms
• Adjusted pressure: 2.000 mbar relative to the intake manifold pressure
• No bleeding operation needed
• Approval: R110

One_touch changeover switch

• SMD single-stable changeover switch
• ø outside 26 mm
• Possible installations:
– built-in with ø 23 mm hole and 2 mm dimension
• With integrated Acoustic indicator (buzzer)
• N° 4 green Leds for level indication
• N° 1 bi-colour (green/red) Led for mode working indication

gaseous phase filter - LPG

• LPG Class 2 Gaseous Phase Filter
• Operating temperature: -40 °C ÷ 120 °C
• Classification pressure: 450 kPa
• Approval: R67-01

PTS Sensata sensor (on rail) low pressure LPG / CNG

• Gas temperature and pressure sensor
• Mass: 22 g
• Overall dimensions: ø= 24 mm, h= 64,5 mm
• Integrated connector
• Power Supply Voltage: 5 ± 0,1 VDC
• Supply Current: 10 mA MAX
• Output Voltage Range (pressure): 0,5 to 4,5 V
• Operating temperature -30 °C ÷ 130 °C
• Approval: R67-01 – R110

Genius Max reducer - LPG

• Diaphragm single-stage type building
• Adjusted pressure: 150 kPa relative to the intake manifold pressure
• No bleeding operation needed
• Approval: R67-01

Genius MB reducer - LPG

• Diaphragm single-stage type building
• Adjusted pressure: 800, 1.200 or 1.500 mbar relative to the intake manifold pressure
• No bleeding operation needed
• Approval: R67-01

GP13 injector

• Impedance: 3 ± 0,2 Ω at 20°C
• Temperature: -20 °C ÷ 120 °C
• Voltage: 8 V ÷ 16 V
• Calibrated nozzles
• Approval: R67-01

Sequent 32 gas ecu - LPG / CNG

• Automotive microprocessor 16 bit – 24 MHz
• Watertight through (IPX9K)
• According to automotive norms for protections and input/output signals
• Operating voltage: 8 V ÷ 16 V
• Maximun voltage: 24 V
• Current in stand-by: <5 μA
• Sensors and actuators diagnosis compatible with EOBD
• Communication and reprogramming with PC through K-line
• It supports KWP2000 communication protocol
• It supports CAN BUS 2.0 communication and K-line
• EMC compliant
• ECU: up to 4 injectors
• Integrated injectors cut and emulation
• Approval: R67-01, R110 and R10